PRICE
Unverified
no price source on file
Pneumatech PH-75 HE is a desiccant heatless compressed-air dryer rated at 74 SCFM. Pressure dew point -5°F. Maximum inlet pressure 203 PSI. Connections: 1 NPT.
Flow
74 SCFM
Dew point
-5 °F
Purge loss
15 %
Max PSI
203 PSI
Air output per kW inputNo flow/power on file
—SCFM/kW
Poor 35Typical 60Good 90
Pressure dew pointClass typical · desiccant · heatless
-5°F
Warmer +30°Class typ -40°FDrier −30°
Price per cubic foot · minuteNo price source on file
—$/SCFM
Good $180Typical $280High $420
PERFORMANCE
Catalog flow74 SCFM @ 203 PSI
Pressure dew point-5°F
Purge loss15%
Rating conditions100 psig / 100°F inlet / 100°F ambient
Regen cycleCounter-current heatless regen, extruded design
Best fitCritical-process drying to −40°F dew point
INLET & OPERATING CONDITIONS
Inlet PSI range58–203 PSI
Max inlet temp122°F
Max ambient113°F
Connections1 NPT
ELECTRICAL & FORM
Electrical service230V 60Hz 1-Ph
Weight241 lb
Dimensions47.4 x 32.6 x 15.5 in
COST & OWNERSHIP
Yearly estimates assume 8 hr/day · 250 day/yr at $0.13/kWh. Adjust to your shop’s actual utilization for a precise number.
Purge cost · yearlyEst. $666
Brochureview · download PDF local copy
Where this sits in the catalog
Compared against 25 other desiccant · heatless dryers in the catalog.
- Flow capacity74scfm6 scfmmedian 113.5 scfm1,500 scfm-34.8% vs. median
- Pressure dew point-5°F-40°Fmedian -40°F-5°F+35°F vs. median
- Purge loss15%15%median 15%18.5%0 pts vs. median
Where this is soldPricing pending verification
Suggest an edit or report a problem
Spot a wrong spec, a broken link, a missing retailer, or anything else? Send a note. Comments are reviewed by editorial — they’re not published.