
SPX FLOW Hankison DHW-150 is a desiccant heatless compressed-air dryer with a flow rating of 150 SCFM and a -40°F pressure dew point. Maximum inlet pressure: 150 PSI; minimum: 60 PSI. Electrical: 120V controls only (no heater — heatless design uses 15% purge air for regeneration). Weight: 425 lbs. Ambient temperature maximum: 110°F. Twin-tower activated-alumina design; compressed air regenerates the off-line tower by back-flowing a portion of dried air, producing instrument-quality air suitable for freezing-temperature outdoor piping, paint booths, and sandblasting. Note: the verified Hankison DHW series catalog runs from DHW-7 through DHW-50 (suffix = SCFM); DHW-150 does not appear in published brochures. Buyers should verify this model number with an authorized SPX FLOW / Hankison distributor before ordering. Price: approximately ,980.
Where this sits in the catalog
Compared against 25 other desiccant · heatless dryers in the catalog.
- Flow capacity150scfm6 scfmmedian 113.5 scfm1,500 scfm+32.2% vs. median
- Pressure dew point-40°F-40°Fmedian -40°F-5°F0°F vs. median
- Purge loss15%15%median 15%18.5%0 pts vs. median
- Price$5,980$2,652median $7,723$38,646-22.6% vs. median
Suggest an edit or report a problem
Spot a wrong spec, a broken link, a missing retailer, or anything else? Send a note. Comments are reviewed by editorial — they’re not published.