Schulz · 932 Series · TWO-STAGE PISTON

932.9347-0

7.50 HP · gas · splash-lubricated · 2-stage
AVERAGE PRICE
$4,163
2 retailers · in stock

Schulz 932.9347-0 (marketed as Schulz V-Series 7580HV30X-1) is a 7.5 HP two-stage splash-lubricated reciprocating piston compressor delivering 30.0 SCFM at 175 PSI on an 80-gallon horizontal tank at 230V single-phase. Max pressure is 175 PSI. The V-Series is Schulz Brazil heavy-duty reciprocating line, widely used in automotive and fabrication shops across North and South America. Retail pricing from authorized Schulz distributors ranges approximately $4,090 to $4,342. The 230V single-phase supply allows installation without three-phase service, broadening site compatibility. No manufacturer datasheet was confirmed on schulzamerica.com; buyers should request the factory spec sheet to verify weight, service intervals, and duty cycle. Confirm electrical supply and discharge connection with an authorized Schulz distributor.

HP
7.50
CFM
30 @ 175 PSI
Duty
continuous
Tank size
80 gal
Air output per horsepowerAirflow per motor HP
4CFM/HP
Poor 2.8Typical 3.15Good 3.5
Isentropic efficiencyClass median · 2-stage piston
67%
Poor <50Good 70Best 92
Price per cubic foot · minuteVerified retailer price
$129$/SCFM
Good $180Typical $211High $260
PUMP & DRIVE
Stages2-stage recip
Cylindertwo-stage cast iron
Pump RPM
Lubricationsplash-lubricated
Oil
Sump
Pump life
Pump material
Head material
Intercooler
PERFORMANCE
Catalog CFM30 @ 175 PSI
CFM / HP4
Cut-in / out
Tank fill
Est. draw6.6 kW
COST & MAINTENANCE
Compressor Controller ROI calc · $0.14/kWh · 1920 hr/yr · 70% motor efficiency · HP×1.10 sizing · savings 23–42% of electric
Electric · yearlyEst. $2,363
Maintenance · yearlyEst. $188
Savings with Compressor Controller · yearlyEst. $544–$993
ELECTRICAL & FORM
Servicegas
Voltage230
Amps
Motor
Motor RPM
Control
Starter
Weight508 lb
Form— · 80 gal
BUILD & ENVIRONMENT
Air outlet
Drain
Drain outlet
ASME tank
Made in USA
Noise
Op. temp
Dimensions
Ship weight
Warranty

Where this sits in the catalog

Histograms below: highlighted bar marks this unit’s bucket.

Catalog
1655 units
Peer class
181 · 7.5 HP
Sizing & pricevs. 181 in class
  • SCFM @ 7.5 HP30cfm
    20median 2457
    +25% vs. median
  • Average price$4,163
    $1,698median $5,117$19k
    -18.6% vs. median
Efficiency vs. peersvs. 181 in class
  • CFM per HP4cfm/hp
    2.67median 3.27.65
    +25% vs. median
  • Price per CFM$129$/scfm
    $73median $208$632
    -38.1% vs. median

Price history

Showing the current verified price for each retailer. As the price-tracking worker collects new readings, dots will appear along each line.

$3,844$4,022$4,201$4,379avg $4,069today-10d-20d-30d
Plumbe Store
JB Tools
Heavy Duty Air