G513H30HCE

Quincy G513H30HCE is the QP-series 13 HP gas-engine truck-mount compressor: a Honda GX390 electric-start engine driving a Quincy QP-7 pressure-lubricated two-stage cast-iron piston pump on a 30-gallon horizontal ASME receiver. Output is 23.6 CFM at 175 PSI continuous, 100 percent duty cycle. Pressure lubrication is the key spec – this is not a splash-lubricated pump, so the QP-7 will run all day under sustained demand without overheating. Pump RPM is approximately 1060. Built for service trucks, contractor trucks, and rental fleets that need stand-alone air on the jobsite without three-phase or single-phase mains. Honda GX390 starts via electric key with recoil backup. Includes low-oil shutdown on both engine and pump, throttle control, and a centrifugal pilot valve to unload the pump at idle. 50,000-hour pump life. Quincy publishes engine maintenance intervals separately; expect 100-hour engine oil changes and 500-hour pump oil changes. Made in the USA, sold under part number 2020040970 at most retailers.