ELGi EN 07 is a 10 HP single-stage oil-flooded rotary screw compressor delivering 38.5 SCFM at 125 PSI on a 120-gallon horizontal ASME tank, rated for 100 percent continuous duty at 66 dBA. The EN 07 weighs 573 lbs and measures 34 by 31 by 39 inches with a 1-inch NPT air outlet. Three-phase 208/230/460V is standard; an optional integrated refrigerated dryer (G2A suffix) is available. The oil-flooded twin-screw airend carries an ELGi-published 100,000-hour design life and ships with ISO 46 synthetic rotary screw fluid. A microprocessor controller manages load/unload cycles, low-oil cutout, overtemp shutdown, and total run hours. Maximum operating pressure is 145 PSI. The EN-Series is priced below comparable Quincy QGS-10 and Ingersoll Rand R-Series units at lower retail price points; ELGi extends an airend warranty when factory fluids and filters are used and builds to ISO 9001 standards. Best fit is a production shop, multi-bay automotive facility, tire shop, or fabrication operation with continuous air demand.
Where this sits in the catalog
Histograms below: highlighted bar marks this unit’s bucket.
- Catalog
- 1708 units
- Peer class
- 59 · 10 HP
- SCFM @ 10 HP38.5cfm20median 39.845-3.1% vs. median
- Average price$7,540$4,547median $11,020$23k-31.6% vs. median
- CFM per HP3.85cfm/hp2median 44.5-3.7% vs. median
- Price per CFM$197$/scfm$185median $265$903-25.7% vs. median
Price history
Showing the current verified price for each retailer. As the price-tracking worker collects new readings, dots will appear along each line.
Suggest an edit or report a problem
Spot a wrong spec, a broken link, a missing retailer, or anything else? Send a note. Comments are reviewed by editorial — they’re not published.