Champion HR10-12 is a 10 HP two-stage splash-lubricated piston compressor with the cast-iron R-30 pump on a 120-gallon horizontal ASME tank, rated 33.8 SCFM at 175 PSI at 718 pump RPM. ACFM is 35.7 at 80 PSI and 34.7 at 125 PSI. The R-30 pump shares finned cylinders, large-bore intercooler tubing, and high-flow disc valves with the smaller HR7-12 but ramps RPM to support the higher displacement. Standard package is 230/460V three-phase with a magnetic starter, automatic tank drain, low oil-level monitor, air-cooled aftercooler, and dual-control panel for either start/stop or continuous-run operation. Best for 4-6 bay auto shops, tire shops, body shops, fabrication and machine shops, and any application that needs 175 PSI continuous service air on three-phase service. Champion (Gardner Denver) backs the pump with a 5-year extended warranty when registered. Long history in commercial automotive applications. Made in the USA.
Where this sits in the catalog
Histograms below: highlighted bar marks this unit’s bucket.
- Catalog
- 1655 units
- Peer class
- 127 · 10 HP
- SCFM @ 10 HP33.8cfm17median 34.279-1.2% vs. median
- Average price$7,399$3,400median $7,494$27k-1.3% vs. median
- CFM per HP3.38cfm/hp1.72median 3.427.96-1.2% vs. median
- Price per CFM$211$/scfm$99median $210$517-0.1% vs. median
Price history
Showing the current verified price for each retailer. As the price-tracking worker collects new readings, dots will appear along each line.
Suggest an edit or report a problem
Spot a wrong spec, a broken link, a missing retailer, or anything else? Send a note. Comments are reviewed by editorial — they’re not published.