HGR7-3H

Champion HGR7-3H is a 13 HP Honda GX390 gas-engine truck-mount compressor pairing a Champion R-15 two-stage cast-iron pump with a 30-gallon horizontal ASME receiver. Output is 23.2 ACFM at 175 PSIG, with the pump running at 1025 RPM. Cut-in is 155 PSI and cut-out is 175 PSI, both controlled by a centrifugal pilot valve that unloads the pump at idle to extend belt and pump life. Honda engine starts via electric key with pull-cord backup. Dimensions are 41.6 by 20.5 by 45.5 inches and net weight is 485 lbs. Champion sells the same platform OEM-rebadged as Belaire 3G3HH, Campbell-Hausfeld CE7003, and FS-Curtis CA13H/CT13H, so parts are widely cross-stocked. Best fit is a service-truck application for HVAC, plumbing, roofing, or commercial mechanical contractors who run an impact wrench, framing nailer, or staple gun off the truck without grid power. The R-15 is a serious industrial pump – same architecture used in the electric R-15-Simplex (post 45) just at higher RPM under engine drive. Made in the USA. 3-year limited pump and engine warranty.