Ingersoll Rand 2475F13GH is a 13 HP Honda GX390 gas-powered Type 30 truck-mount compressor on a 30-gallon horizontal ASME tank. Output is 24 CFM at 175 PSI continuous, 100 percent duty, with the cast-iron T30 pump running at a maximum 1500 RPM. Honda engine starts via electric key with pull-cord backup; an alternator and battery support the electric start. Dimensions are 22 by 43.8 by 41 inches and net weight is 585 lbs. Sound is approximately 85 dBA. Includes pressure switch, regulator, pressure gauge, and engine low-oil shutdown. The 0.5 inch NPT outlet limits peak flow to single-tool service rather than multi-line splitting. Best fit is a service truck for HVAC, plumbing, or roofing where the operator runs an impact wrench, framing nailer, or staple gun off the truck without grid power. The IR T30 platform is the same workhorse pump used in IR’s electric stationary line – parts are widely stocked at IR distributors. Made in the USA.
Where this sits in the catalog
Histograms below: highlighted bar marks this unit’s bucket.
- Catalog
- 1708 units
- Peer class
- 18 · 13 HP
- SCFM @ 13 HP24cfm18median 23.232+3.4% vs. median
- Average price$3,760$2,949median $4,199$6k-10.5% vs. median
- CFM per HP1.85cfm/hp1.38median 1.782.46+3.4% vs. median
- Price per CFM$142$/scfm$123median $193$259-26.6% vs. median
Price history
Showing the current verified price for each retailer. As the price-tracking worker collects new readings, dots will appear along each line.
Suggest an edit or report a problem
Spot a wrong spec, a broken link, a missing retailer, or anything else? Send a note. Comments are reviewed by editorial — they’re not published.